氧化物
氧化物是重要的材料类别,如常见的氧化铝陶瓷就属于氧化物的一种。氧化物的导电性一般比较差,在SEM下观察氧化物时,可考虑先进行喷碳处理;或者制备TEM样品直接进行更微观尺度上的表征或相结构分析。
在燃气轮机叶片表面涂上热防护涂层,可以保护叶片材料免受高温氧化和热腐蚀。MCrAlX型 (M=Ni, Co, Ni+Co, X = Y, Hf, Si, Ta等)涂料作为高温防护涂料或热障涂料的粘结涂料,因其良好的韧性和优异的高温抗氧化性和耐腐蚀性,被广泛应用。论文的研究的是HCPEB辐照对涂层的影响,所以对辐照前后涂层的形貌、微观组织感兴趣。对应的表征手段有金相刻蚀、三维激光扫描显微镜(LSM)、SEM、TEM等。下图展示了未经HCPEB辐照的涂层样品的情况。图a可以看到样品表面凹凸不平,表面粗糙度约为3um,这是由于电弧离子镀时,靶材熔化,一些液滴在电场下加速飞溅到涂层表面,形成大小不一的颗粒或凸起。TEM下可以看到晶粒尺寸约为300-500nm。
而经过HCPEB辐照后,涂层的微观结构与原始涂层有明显的不同,如下图所示。总体来说,增加脉冲数是的涂层表面更加平滑,粗糙度更低,重熔层更厚。然而当脉冲数量达到40时,表面出现熔坑,粗糙度又有回升。